To download files: Click on the download link above.

190 Targets is a PC-based application that allows the user to download checkweigher presets to a 190 indicator. The PC software stores a small database of presets, so as those presets change they may easily be updated from one central location without the need to physically change the values on the 190 indicator. 190 Targets software allows you to create Under/Accept/Over target presets which may be selected from a list and then easily managed as checkweighing targets need to be updated.

Simply install the 190 Targets software on a PC and then connect that PC to the 190 indicator via RS232 serial, Wi-Fi, or Ethernet.

Requirements:

Windows (XP, Vista, 7, 8.0, or 8.1)

.NET Framework 4.0

Rev 2.3.2 – Effective 2/5/2015

To download files: Click on the download link above.

Rev 1.00.20 – Effective 6/26/2017

Rev 1.00.20 Updates:
• Addition of a ZERO-only calibration.
• Option from 201 web page to load configuration only OR configuration and calibration both (previous version only loaded both with the ability to load cofig only).

Rev 1.00.19 Updates:
• Enforce zero limit (trL) when USA = NO and LFT = YES.
• For the below listed strings, show below zero status for currently displayed mode (Gross or Net) instead of just for Gross:
- SMA
- IQ355
- Comp1
- Comp2

Rev 1.00.18 Updates:
• Handles ModbusTCP connections more quickly so the display does not get bogged down by quick connections and disconnections.

Rev 1.00.18A Updates:
• This revision expands our in-house group of acceptable MAC addresses. Functionality does not change on user-end.

Rev 1.00.17 Updates:
• Added ability to do “False Zero Calibration”. Adjusts Span but not zero. Useful for tank weighing applications.
• Enable Import of settings taken from older revisions.
• Look for Ethernet connections during runtime if initial connection fails.
• Drive digital outputs via EIP or Modbus.
• Allow Modbus to read current DIO (EIP already does this).
• Add heartbeat to EIP to detect freezes.

Rev 1.00.16 Updates:
• Fixed Export/Import issues when using Internet Explorer.

Rev 1.00.15 Updates:
• Fixed hang-up on boot when absolute deadload is 0.

Rev 1.00.14 Updates:
• Added watchdog to allow indicator to recognize and recover from a crash.
• Updated ModBus to provide command response.

Rev 1.00.13 Updates:
• Never released.

Rev 1.00.12 Updates:
• Added RiceLake IQ355 format.
• Added UDP broadcast mode selection to raw server output.

Rev 1.00.11 Updates:
• Added Import/Export/Default settings to Diagnostics Web Page.

Rev 1.00.10 Updates:
• Fixed a bug that could cause calibration to be lost if the scale was zeroed while no scale was attached.

Rev 1.00.09 Updates:
• Fixed some issues with DFC.

Rev 1.00.08 Updates:
• Added rate of flow measurement to always be in modbus communication. If rate of flow is disabled, zero will be transmitted.

Rev 1.00.08A Updates:
• Fixed some issues with the Net fill modes of the DFC.
• Fixed an issue with the DFC timer.
• Added zero tolerance to DFC. Now when zero tolerance > 0, the 201 will dump to zero tolerance rather than dump until no motion.
• Added auto print to DFC. Now upon capturing the final weight the DFC will print to all channels set up as printer outputs. This also means that gross and net weight accumulators will get updated accordingly.

Rev 1.00.07 Updates:
• Added Digital Fill Control options and configuration parameters.

Rev 1.00.06 Updates:
• Changed flow rate to use the weight filtering and sample rate to control the filtering of flow rate data.
• Fixed an issue with digital I/O by adding a few microseconds of debounce.

Rev 1.00.06A Updates:
• Added option to get weight data from the analog input (4-20mA or 0-10vdc) or from the normal scale input.
• Implemented the RS485/422 support for serial communications.
• Added an address byte input in setup for multidrop bus using the 485 port in 2 or 4 wire mode. If set to ‘0’, then the port will work like a RS422 port.
• Fixed an issue in the EIP transmission of high resolution weight and rate of flow which required toggling of the command bits.
• Fixed an issue with the weight output on all ports where zero weight was being transmitted when an error condition existed instead of sending dashes for the weight.

Rev 1.00.05 Updates:
• Fixed an issue with the backlight color setting for the current checkweigh range not taking effect immediately when changed from the web configuration page.
• Fixed an issue with the backlight color not getting set properly when the indicator starts up with a negative weight.
• Added flow rate calculation and output:
NOTE: It is recommended that filtering be set to Off or Minimal and sample rate be set to 1 in order to get the best results. More info to come with the updates to the 201 manual.
• Fixed some bugs with the EIP commands for zero and tare.
• Fixed an issue where the 201 failed to communicate to CompactLogix model PLC using EIP.
• Web page now correctly shows the default background color if checkweigh feature is turned off.

Rev 1.00.05B Updates:
• Fixed an issue with the 201 not outputting weight data after reconnecting to the raw Ethernet port when the weight format was set to a continuous output format.

Rev 1.00.05A Updates:
• Added min and max weight values for the DAC output channels in order to set the span for the output for the corresponding DAC channel.
• Analog setup webpage has the min and max parameters added in order to set the values.
• Indicator setup through the keypad now has the prompts added to set these min/max values through the setup under the Analog IO group.

Rev 1.00.04 Updates:
• Web page weight background color now matches the 201 display.
• Changes to presets take effect immediately without having to cycle power.

Planned Enhancements/Features:
• Add DFC command and control through EIP and Modbus TCP communication.
• Backup and restore of settings/calibration to SD Card.
• 201 update guide for field updating the software.

Update Instructions:
1.) Remove power from the 201 indicator.
2.) Press and hold the cal switch while applying power to the 201, the display should show “boot”.
3.) Connect the USB port of the 201 to your PC using a USB A to USB mini B cable.
4.) Open “My Computer” and look for “UPDATE 201” under your removable storage devices.
5.) Make sure the update is unzipped and drag and drop the update file to the “UPDATE 201” removable storage device.
6.) Wait for the update to complete. You should see a “SUCCESS.TXT” file appear in the “UPDATE 201” drive and “done” on the 201 display.
7.) Remove the USB cable and cycle power on the 201 to complete the update process.

To download files: Click on the download link above.

Rev 3.0.5 – Effective 12/5/2014

Rev 3.0.5 Updates
• Fixed scrolling ID’s and Plots.
• Changed so ID is not deselected when exiting RECALL menu via ASTERISK key.
• Added plot ID printing to reports when applicable.

To download files: Click on the download link above.

Rev 2.0.17 Updates – 9/30/2016:

• PWC mode of operation now has ability to use PWC1 as a zero monitor.
• Fixed display bug which occurred when ID prompts exceeded 9 characters.
• Added badge reader back to 225-USA build.
• All ICAN BUILDS – fixed bug that allowed weight to be transmitted in certain “no weight” error conditions.
• 225-SNAP – Added radio diagnostics that measures signal strength to each radio (requires 2XX-SNAP rev 1.5.7).

Rev 2.0.16 Updates – 5/25/2016:
• Add below zero status “U” to SMA string.
• Fix issues with FINE SPAN and HI RES when adjusting in high weight range (only applies to scales with 3-pt calibration).
• Bug fixes for SST compensation regarding dpp, stability, and saving upon exit of SETUP.

Rev 2.0.15 Updates – 4/15/2016:
• Fixed bug in the storing of serial ports’ “Gross Only” parameter.

Rev 2.0.14 Updates – 2/16/2016:
• Sped up read/write operations on the USBA option card.
• Fixed problem when auto assigning an ID, was not checking for ID on flash drive or SDcard on USBA option card.

Rev 2.0.13 Updates – 1/22/2016:
• Fixed the toledo long (8530) continuous output data stream check summing error.
• The Gross weight was not being written to the flash drive record with more than 1 scale and they were not totalized.

Rev 2.0.12 Updates - 1/4/2016:
• Added settle timer between each ingredient in the BATCHER mode of operation.

Rev 2.0.11 Updates - 10/26/2015:
• Fixed problem with site ID for AWID badge reader.
• Added sleep mode for weight display when an SB500 scoreboard is attached. The key sequence is SHIFT-ESC S to turn on/off sleep mode.

Rev 2.0.10 Updates - 8/25/2015:
• Add Status for device installed in 2XX-USBA option card.
- SD=SD CARD
- FD=FLASH DRIVE
- KB=KEYBOARD
• Remove duplicated functions from FUNCTION= menu (*NET, *TARE, *UNITS, *ACCUM, *Z, *z).

Rev 2.0.09 Updates - 8/6/2015:
• Enable Outputs 5-8 when USBA option card is installed.
• Fix USBA display bug in Setup Menu #3.
• Allow a WinVRS local to send other scales’ weights to remote (besides SCALE 1).
• Add ability to backup 2XX-SNAP calibration to 225 internal memory for later retrieval (e.g. when an option card is replaced).
• Fix bugs in Talley Roll.

Rev 2.0.08 Updates - 4/29/2015:
• Add Gross/Net to tally record.
• Bug fixes in continuous output streams.

Rev 2.0.07 Updates - 12/3/2014:
• Fixed ANALOG FAIL error when the GUARDIAN scale type is selected.
• Fixed problem where the conversion factor gets corrupted in FINE SPAN and HIRES modes.

Rev 2.0.06 Updates - 11/20/2014:
• Added missing fields to ID Storage transaction file.
• Fixed bug in PWC Preset menu for remote indicator.
• Added byte order selection for 2xx-AB and 2xx-EIP option cards.
• Fixed lockup/display issues with various diagnostic selections in the REVIEW/SETUP Menu.

Version 2.0.05 Updates – 10/8/2014:
• Slow down printing in PRINT SETUP to allow slower printers to catch up.
• Bug fixes in print setup.
• Added more efficient wait timer.
• Added selection of 2XX-IP option card for printer.
• Prevent beeper from calling scale functions while in setup.
• Removed code disabling interrupts where possible to prevent beeper from being garbled.
• SnapStream bugs fixed:
- Fine span menu displaying error
- Diagnostic menu lockups
- Diagnostic menu display not clearing unneeded info
- Diagnostic menu storing load cell data incorrectly
- 2XX-SNAP remote indicator no long requires a power-cycle to start receiving weight

Version 2.0.04 Updates – 8/21/2014:
• Fixed problem with re-printing ticket.
• Verify zeroing from remote indicator and retry (Local/Remote Operation).
• Get weight and reference from ID record for 2nd and 3rd IDs on USBA card (mode= ID Storage or Package Weigher).
• Allow displaying negative weight on remote display for INTL version.

Version 2.0.03 Updates – 6/9/2014:
• Modified directory path for file storage on USB flash drive.
• ETR stores Gross or Net weight and mode.
• Fixed display problem when viewing calibration/configuration counters.
• Fixed timing when doing INTL lamptest to display software info.
• Clear totalizer over capacity status when all scales under capacity.

Version 2.0.02 Updates – 2/28/2014:
• Fixed problem with zeroing and changing units in local/remote operation.

Version 2.0.01 Updates – 1/29/2014:
• Added support for 2xx-USBA option card.
• Added Scale ID setup parameter.

Version 2.0.0
• Initial release for re-designed mainboard.

225-INTL.hex:

1. Supports analog and serial scales
2. Supports Electronic Talley Roll (ETR)
3. MODE OF OPERATIONS:
a. Normal
b. ID Storage
c. Digital Fill Control
d. Preset Weight Comparator
e. Check Weigher
f. Batcher
g. Package Weigher
4. Serial output formats:
a. SMA
b. SB400
c. TOLEDO (short and long)
d. IQ355
e. NUMERIC WEIGHT
f. SB500
g. SB250/500M

AVR USB Update 225 Main Software Instructions

(AVR-ISP with USB Cable)

For instructions on how to flash the 225 main PC board software, please select Manuals, and then download this PDF:

AVRUSB Update 225 Main Software

To download files: Click on the download link above.

Rev 2.0.18 Updates – 1/20/2017:
• Fixed a loss of deadload during certain scenarios involving power outages.
• Added more descriptive boot-up error messages when there is a CAN bus error.

Rev 2.0.17 Updates – 9/30/2016:
• PWC mode of operation now has ability to use PWC1 as a zero monitor.
• Fixed display bug which occurred when ID prompts exceeded 9 characters.
• Added badge reader back to 225-USA build.
• All ICAN BUILDS – fixed bug that allowed weight to be transmitted in certain “no weight” error conditions.
• 225-SNAP – Added radio diagnostics that measures signal strength to each radio (requires 2XX-SNAP rev 1.5.7).

Rev 2.0.16 Updates – 5/25/2016:
• Add below zero status “U” to SMA string.
• Fix issues with FINE SPAN and HI RES when adjusting in high weight range (only applies to scales with 3-pt calibration).
• Bug fixes for SST compensation regarding dpp, stability, and saving upon exit of SETUP.
• Add SST-style adjustment to ICAN for hydraulic-ICAN installations.

Rev 2.0.15 Updates – 4/15/2016:
• Fixed bug in the storing of serial ports’ “Gross Only” parameter.

Rev 2.0.14 Updates – 2/16/2016:
• Sped up read/write operations on the USBA option card.
• Fixed problem when auto assigning an ID, was not checking for ID on flash drive or SDcard on USBA option card.

Rev 2.0.13 Updates – 1/22/2016:
• Fixed the toledo long (8530) continuous output data stream check summing error.
• The Gross weight was not being written to the flash drive record with more than 1 scale and they were not totalized.

Rev 2.0.12 Updates - 1/4/2016:
• Revision update only.

Rev 2.0.11 Updates - 10/26/2015:
• Fixed problem with site ID for AWID badge reader.
• Added sleep mode for weight display when an SB500 scoreboard is attached. The key sequence is SHIFT-ESC S to turn on/off sleep mode.

Rev 2.0.10 Updates - 8/25/2015:
• Add Status for device installed in 2XX-USBA option card.
- SD=SD CARD
- FD=FLASH DRIVE
- KB=KEYBOARD
• Remove duplicated functions from FUNCTION= menu (*NET, *TARE, *UNITS, *ACCUM, *Z, *z).

Rev 2.0.09 Updates - 8/6/2015:
• Enable Outputs 5-8 when USBA option card is installed.
• Fix USBA display bug in Setup Menu #3.
• Allow a WinVRS local to send other scales’ weights to remote (besides SCALE 1).
• Add ability to backup 2XX-SNAP calibration to 225 internal memory for later retrieval (e.g. when an option card is replaced).
• Fix bugs in Talley Roll.

Rev 2.0.08 Updates - 4/29/2015:
• Add Gross/Net to tally record.
• Bug fixes in continuous output streams.

Rev 2.0.07 Updates - 12/3/2014:
• Fixed ANALOG FAIL error when the GUARDIAN scale type is selected.
• Fixed problem where the conversion factor gets corrupted in FINE SPAN and HIRES modes.

Rev 2.0.06 Updates - 11/20/2014:
• Added missing fields to ID Storage transaction file.
• Fixed bug in PWC Preset menu for remote indicator.
• Added byte order selection for 2xx-AB and 2xx-EIP option cards.
• Fixed lockup/display issues with various diagnostic selections in the REVIEW/SETUP Menu.

Version 2.0.05 Updates – 10/8/2014:
• Slow down printing in PRINT SETUP to allow slower printers to catch up.
• Bug fixes in print setup.
• Added more efficient wait timer.
• Added selection of 2XX-IP option card for printer.
• Prevent beeper from calling scale functions while in setup.
• Removed code disabling interrupts where possible to prevent beeper from being garbled.
• SnapStream bugs fixed:
- Fine span menu displaying error
- Diagnostic menu lockups
- Diagnostic menu display not clearing unneeded info
- Diagnostic menu storing load cell data incorrectly
- 2XX-SNAP remote indicator no long requires a power-cycle to start receiving weight

Version 2.0.04 Updates – 8/21/2014:
• Fixed problem with re-printing ticket.
• Verify zeroing from remote indicator and retry (Local/Remote Operation).
• Get weight and reference from ID record for 2nd and 3rd IDs on USBA card (mode= ID Storage or Package Weigher).
• Allow displaying negative weight on remote display for INTL version.

Version 2.0.03 Updates – 6/9/2014:
• Modified directory path for file storage on USB flash drive.
• ETR stores Gross or Net weight and mode.
• Fixed display problem when viewing calibration/configuration counters.
• Fixed timing when doing INTL lamptest to display software info.
• iCan limited to 50 sample\sec was 10.
• Clear totalizer over capacity status when all scales under capacity.

Version 2.0.02 Updates – 2/28/2014:
• Fixed problem with zeroing and changing units in local/remote operation.

Version 2.0.01 Updates – 1/29/2014:
• Added support for 2xx-USBA option card.
• Added Scale ID setup parameter.

Version 2.0.0
• Initial release for re-designed mainboard.

225-INTL-ICAN.hex:

1. Supports ICAN
2. Supports analog and serial scales
3. Supports Electronic Talley Roll (ETR)
4. MODE OF OPERATIONS:
a. Normal
b. ID Storage
c. Digital Fill Control
d. Preset Weight Comparator
e. Check Weigher
f. Batcher
g. Package Weigher
5. Serial output formats:
a. SMA
b. SB400
c. TOLEDO (short and long)
d. IQ355
e. NUMERIC WEIGHT
f. SB500
g. SB250/500M

AVR USB Update 225 Main Software Instructions

(AVR-ISP with USB Cable)
For instructions on how to flash the 225 main PC board software, please select Manuals, and then download this PDF:

AVRUSB Update 225 Main Software

To download files: Click on the download link above.

Rev 2.0.17 Updates – 9/30/2016:

• PWC mode of operation now has ability to use PWC1 as a zero monitor.
• Fixed display bug which occurred when ID prompts exceeded 9 characters.
• Added badge reader back to 225-USA build.
• All ICAN BUILDS – fixed bug that allowed weight to be transmitted in certain “no weight” error conditions.
• 225-SNAP – Added radio diagnostics that measures signal strength to each radio (requires 2XX-SNAP rev 1.5.7).

Rev 2.0.16 Updates – 5/25/2016:
• Add below zero status “U” to SMA string.
• Fix issues with FINE SPAN and HI RES when adjusting in high weight range (only applies to scales with 3-pt calibration).
• Bug fixes for SST compensation regarding dpp, stability, and saving upon exit of SETUP.

Rev 2.0.15 Updates – 4/15/2016:
• Fixed bug in the storing of serial ports’ “Gross Only” parameter.

Rev 2.0.14 Updates – 2/16/2016:
• Sped up read/write operations on the USBA option card.
• Fixed problem when auto assigning an ID, was not checking for ID on flash drive or SDcard on USBA option card.

Rev 2.0.13 Updates – 1/22/2016:
• Fixed the toledo long (8530) continuous output data stream check summing error.
• The Gross weight was not being written to the flash drive record with more than 1 scale and they were not totalized.

Rev 2.0.12 Updates - 1/4/2016:
• Allowed Gross only continuous output.

Rev 2.0.11 Updates - 10/26/2015:
• Fixed problem with site ID for AWID badge reader.
• Added sleep mode for weight display when an SB500 scoreboard is attached. The key sequence is SHIFT-ESC S to turn on/off sleep mode.

Rev 2.0.10 Updates - 8/25/2015:
• Add Status for device installed in 2XX-USBA option card.
- SD=SD CARD
- FD=FLASH DRIVE
- KB=KEYBOARD
• Remove duplicated functions from FUNCTION= menu (*NET, *TARE, *UNITS, *ACCUM, *Z, *z).

Rev 2.0.09 Updates - 8/6/2015:
• Enable Outputs 5-8 when USBA option card is installed.
• Fix USBA display bug in Setup Menu #3.
• Allow a WinVRS local to send other scales’ weights to remote (besides SCALE 1).
• Add ability to backup 2XX-SNAP calibration to 225 internal memory for later retrieval (e.g. when an option card is replaced).
• Fix bugs in Talley Roll.

Rev 2.0.08 Updates - 4/29/2015:
• Add Gross/Net to tally record.
• Bug fixes in continuous output streams.

Rev 2.0.07 Updates - 12/3/2014:
• Fixed ANALOG FAIL error when the GUARDIAN scale type is selected.
• Fixed problem where the conversion factor gets corrupted in FINE SPAN and HIRES modes.

Rev 2.0.06 Updates - 11/20/2014:
• Added missing fields to ID Storage transaction file.
• Fixed bug in PWC Preset menu for remote indicator.
• Added byte order selection for 2xx-AB and 2xx-EIP option cards.
• Fixed lockup/display issues with various diagnostic selections in the REVIEW/SETUP Menu.

Version 2.0.05 Updates – 10/8/2014:
• Slow down printing in PRINT SETUP to allow slower printers to catch up.
• Bug fixes in print setup.
• Added more efficient wait timer.
• Added selection of 2XX-IP option card for printer.
• Prevent beeper from calling scale functions while in setup.
• Removed code disabling interrupts where possible to prevent beeper from being garbled.
• SnapStream bugs fixed:
- Fine span menu displaying error
- Diagnostic menu lockups
- Diagnostic menu display not clearing unneeded info
- Diagnostic menu storing load cell data incorrectly
- 2XX-SNAP remote indicator no long requires a power-cycle to start receiving weight

Version 2.0.04 Updates – 8/21/2014:
• Fixed problem with re-printing ticket.
• Verify zeroing from remote indicator and retry (Local/Remote Operation).
• Get weight and reference from ID record for 2nd and 3rd IDs on USBA card (mode= ID Storage or Package Weigher).
• Allow displaying negative weight on remote display for INTL version.

Version 2.0.03 Updates – 6/9/2014:
• Modified directory path for file storage on USB flash drive.
• ETR stores Gross or Net weight and mode.
• Fixed display problem when viewing calibration/configuration counters.
• Fixed timing when doing INTL lamptest to display software info.
• Clear totalizer over capacity status when all scales under capacity.

Version 2.0.02 Updates – 2/28/2014:
• Fixed problem with zeroing and changing units in local/remote operation.

Version 2.0.01 Updates – 1/29/2014:
• Added support for 2xx-USBA option card.
• Added Scale ID setup parameter.

Version 2.0.0
• Initial release for re-designed mainboard.

225-INTL-SCD.hex:

1. Supports SCD scales
2. Supports analog and serial scales
3. Supports Electronic Talley Roll (ETR)
4. MODE OF OPERATIONS:
a. Normal
b. ID Storage
c. Digital Fill Control
d. Preset Weight Comparator
e. Batcher
f. Package Weigher
5. Serial output formats:
a. SMA
b. SB400
c. TOLEDO (short and long)
d. IQ355
e. NUMERIC WEIGHT
f. SB500
g. SB250/500M

AVR USB Update 225 Main Software Instructions

(AVR-ISP with USB Cable)

For instructions on how to flash the 225 main PC board software, please select Manuals, and then download this PDF:

AVRUSB Update 225 Main Software

To download files: Click on the download link above.

Rev 2.0.17 Updates – 9/30/2016:

• PWC mode of operation now has ability to use PWC1 as a zero monitor.
• Fixed display bug which occurred when ID prompts exceeded 9 characters.
• Added badge reader back to 225-USA build.
• All ICAN BUILDS – fixed bug that allowed weight to be transmitted in certain “no weight” error conditions.
• 225-SNAP – Added radio diagnostics that measures signal strength to each radio (requires 2XX-SNAP rev 1.5.7).

Rev 2.0.16 Updates – 5/25/2016:
• Add below zero status “U” to SMA string.
• Fix issues with FINE SPAN and HI RES when adjusting in high weight range (only applies to scales with 3-pt calibration).
• Bug fixes for SST compensation regarding dpp, stability, and saving upon exit of SETUP.
• Added badge reader and site ID functionality.

Rev 2.0.15 Updates – 4/15/2016:
• Fixed bug in the storing of serial ports’ “Gross Only” parameter.

Rev 2.0.14 Updates – 2/16/2016:
• Sped up read/write operations on the USBA option card.
• Fixed problem when auto assigning an ID, was not checking for ID on flash drive or SDcard on USBA option card.

Rev 2.0.13 Updates – 1/22/2016:
• Fixed the toledo long (8530) continuous output data stream check summing error.
• The Gross weight was not being written to the flash drive record with more than 1 scale and they were not totalized.

Rev 2.0.12 Updates - 1/4/2016:
• Added settle timer between each ingredient in the BATCHER mode of operation.

Rev 2.0.11 Updates - 10/26/2015:
• Fixed problem with site ID for AWID badge reader.
• Added sleep mode for weight display when an SB500 scoreboard is attached. The key sequence is SHIFT-ESC S to turn on/off sleep mode.

Rev 2.0.10 Updates - 8/25/2015:
• Add Status for device installed in 2XX-USBA option card.
- SD=SD CARD
- FD=FLASH DRIVE
- KB=KEYBOARD
• Remove duplicated functions from FUNCTION= menu (*NET, *TARE, *UNITS, *ACCUM, *Z, *z).

Rev 2.0.09 Updates - 8/6/2015:
• Enable Outputs 5-8 when USBA option card is installed.
• Fix USBA display bug in Setup Menu #3.
• Allow a WinVRS local to send other scales’ weights to remote (besides SCALE 1).
• Add ability to backup 2XX-SNAP calibration to 225 internal memory for later retrieval (e.g. when an option card is replaced).
• Fix bugs in Talley Roll.

Rev 2.0.08 Updates - 4/29/2015:
• Add Gross/Net to tally record.
• Bug fixes in continuous output streams.
• Add below zero weight to be displayed/transmitted for NWS build (old protocol required “———-“ for below zero).

Rev 2.0.07 Updates - 12/3/2014:
• Fixed ANALOG FAIL error when the GUARDIAN scale type is selected.
• Fixed problem where the conversion factor gets corrupted in FINE SPAN and HIRES modes.

Rev 2.0.06 Updates - 11/20/2014:
• Added missing fields to ID Storage transaction file.
• Fixed bug in PWC Preset menu for remote indicator.
• Added byte order selection for 2xx-AB and 2xx-EIP option cards.
• Fixed lockup/display issues with various diagnostic selections in the REVIEW/SETUP Menu.

Version 2.0.05 Updates – 10/8/2014:
• Slow down printing in PRINT SETUP to allow slower printers to catch up.
• Bug fixes in print setup.
• Added more efficient wait timer.
• Added selection of 2XX-IP option card for printer.
• Prevent beeper from calling scale functions while in setup.
• Removed code disabling interrupts where possible to prevent beeper from being garbled.
• SnapStream bugs fixed:
- Fine span menu displaying error
- Diagnostic menu lockups
- Diagnostic menu display not clearing unneeded info
- Diagnostic menu storing load cell data incorrectly
- 2XX-SNAP remote indicator no long requires a power-cycle to start receiving weight

AVR USB Update 225 Main Software Instructions

(AVR-ISP with USB Cable)

For instructions on how to flash the 225 main PC board software, please select Manuals, and then download this PDF:

AVRUSB Update 225 Main Software

To download files: Click on the download link above.

Rev 2.0.17 Updates – 9/30/2016:
• PWC mode of operation now has ability to use PWC1 as a zero monitor.
• Fixed display bug which occurred when ID prompts exceeded 9 characters.
• Added badge reader back to 225-USA build.
• All ICAN BUILDS – fixed bug that allowed weight to be transmitted in certain “no weight” error conditions.
• 225-SNAP – Added radio diagnostics that measures signal strength to each radio (requires 2XX-SNAP rev 1.5.7).

Rev 2.0.16 Updates – 5/25/2016:
• Add below zero status “U” to SMA string.
• Fix issues with FINE SPAN and HI RES when adjusting in high weight range (only applies to scales with 3-pt calibration).
• Bug fixes for SST compensation regarding dpp, stability, and saving upon exit of SETUP.

Rev 2.0.15 Updates – 4/15/2016:
• Fixed bug in the storing of serial ports’ “Gross Only” parameter.

Rev 2.0.14 Updates – 2/16/2016:
• Sped up read/write operations on the USBA option card.
• Fixed problem when auto assigning an ID, was not checking for ID on flash drive or SDcard on USBA option card.

Rev 2.0.13 Updates – 1/22/2016:
• Fixed the toledo long (8530) continuous output data stream check summing error.
• The Gross weight was not being written to the flash drive record with more than 1 scale and they were not totalized.
• Removed the checkweighing mode of operation.

Rev 2.0.12 Updates - 1/4/2016:
• Added settle timer between each ingredient in the BATCHER mode of operation.

Rev 2.0.11 Updates - 10/26/2015:
• Fixed problem with site ID for AWID badge reader.
• Fixed rounding error when weight is within 1 graduation of zero.
• Added sleep mode for weight display when an SB500 scoreboard is attached. The key sequence is SHIFT-ESC S to turn on/off sleep mode.

Rev 2.0.10 Updates - 8/25/2015:
• Add Status for device installed in 2XX-USBA option card.
- SD=SD CARD
- FD=FLASH DRIVE
- KB=KEYBOARD
• Remove duplicated functions from FUNCTION= menu (*NET, *TARE, *UNITS, *ACCUM, *Z, *z).
• Fixed Batcher Mode bug introduced in rev 2.0.09.

Rev 2.0.09 Updates - 8/6/2015:
• Enable Outputs 5-8 when USBA option card is installed.
• Fix USBA display bug in Setup Menu #3.
• Allow a WinVRS local to send other scales’ weights to remote (besides SCALE 1).
• Add ability to backup 2XX-SNAP calibration to 225 internal memory for later retrieval (e.g. when an option card is replaced).
• Fix bugs in Talley Roll.

Rev 2.0.08 Updates - 4/29/2015:
• Add Gross/Net to tally record.
• Bug fixes in continuous output streams.

Rev 2.0.07 Updates - 12/3/2014:
• Fixed ANALOG FAIL error when the GUARDIAN scale type is selected.
• Fixed problem where the conversion factor gets corrupted in FINE SPAN and HIRES modes.

Rev 2.0.06 Updates - 11/20/2014:
• Added missing fields to ID Storage transaction file.
• Fixed bug in PWC Preset menu for remote indicator.
• Added byte order selection for 2xx-AB and 2xx-EIP option cards.
• Fixed lockup/display issues with various diagnostic selections in the REVIEW/SETUP Menu.

Version 2.0.05 Updates – 10/8/2014:
• Slow down printing in PRINT SETUP to allow slower printers to catch up.
• Bug fixes in print setup.
• Added more efficient wait timer.
• Added selection of 2XX-IP option card for printer.
• Prevent beeper from calling scale functions while in setup.
• Removed code disabling interrupts where possible to prevent beeper from being garbled.
• SnapStream bugs fixed:
- Fine span menu displaying error
- Diagnostic menu lockups
- Diagnostic menu display not clearing unneeded info
- Diagnostic menu storing load cell data incorrectly
- 2XX-SNAP remote indicator no long requires a power-cycle to start receiving weight

Version 2.0.04 Updates – 8/21/2014:
• Fixed problem with re-printing ticket.
• Verify zeroing from remote indicator and retry (Local/Remote Operation).
• Get weight and reference from ID record for 2nd and 3rd IDs on USBA card (mode= ID Storage or Package Weigher).

Version 2.0.03 Updates – 6/9/2014:
• Modified directory path for file storage on USB flash drive.
• Fixed display problem when viewing calibration/configuration counters.
• Clear totalizer over capacity status when all scales under capacity.
• Allow USA=NO and not force calibration.

Version 2.0.02 Updates – 2/28/2014:
• Fixed problem with zeroing and changing units in local/remote operation.

Version 2.0.01 Updates – 1/29/2014:
• Added support for 2xx-USBA option card.
• Added Scale ID setup parameter.

Version 2.0.0
• Initial release for re-designed mainboard.

225-USA.hex:

1. Supports analog and serial scales
2. Badge reader for ID Storage
3. MODE OF OPERATIONS:
a. Normal
b. ID Storage
c. Digital Fill Control
d. Preset Weight Comparator
e. Check Weigher
f. Batcher
g. Package Weigher
4. Serial output formats:
a. SMA
b. SB400
c. TOLEDO (short and long)
d. IQ355
e. NUMERIC WEIGHT
f. SB500
g. SB250/500M
h. SB200

AVR USB Update 225 Main Software Instructions

(AVR-ISP with USB Cable)

For instructions on how to flash the 225 main PC board software, please select Manuals, and then download this PDF:

AVRUSB Update 225 Main Software

To download files: Click on the download link above.

Rev 2.0.18 Updates – 1/20/2017:
• Fixed a loss of deadload during certain scenarios involving power outages.
• Added more descriptive boot-up error messages when there is a CAN bus error.

Rev 2.0.17 Updates – 9/30/2016:
• PWC mode of operation now has ability to use PWC1 as a zero monitor.
• Fixed display bug which occurred when ID prompts exceeded 9 characters.
• Added badge reader back to 225-USA build.
• All ICAN BUILDS – fixed bug that allowed weight to be transmitted in certain “no weight” error conditions.
• 225-SNAP – Added radio diagnostics that measures signal strength to each radio (requires 2XX-SNAP rev 1.5.7).

Rev 2.0.16 Updates – 5/25/2016:
• Add below zero status “U” to SMA string.
• Fix issues with FINE SPAN and HI RES when adjusting in high weight range (only applies to scales with 3-pt calibration).
• Bug fixes for SST compensation regarding dpp, stability, and saving upon exit of SETUP.
• Add SST-style adjustment to ICAN for hydraulic-ICAN installations.

Rev 2.0.15 Updates – 4/15/2016:
• Fixed bug in the storing of serial ports’ “Gross Only” parameter.

Rev 2.0.14 Updates – 2/16/2016:
• Sped up read/write operations on the USBA option card.
• Fixed problem when auto assigning an ID, was not checking for ID on flash drive or SDcard on USBA option card.

Rev 2.0.13 Updates – 1/22/2016:
• Fixed the toledo long (8530) continuous output data stream check summing error.
• The Gross weight was not being written to the flash drive record with more than 1 scale and they were not totalized.

Rev 2.0.12 Updates - 1/4/2016:
• Revision update only.

Rev 2.0.11 Updates - 10/26/2015:
• Fixed problem with site ID for AWID badge reader.
• Added sleep mode for weight display when an SB500 scoreboard is attached. The key sequence is SHIFT-ESC S to turn on/off sleep mode.

Rev 2.0.10 Updates - 8/25/2015:
• Add Status for device installed in 2XX-USBA option card.
- SD=SD CARD
- FD=FLASH DRIVE
- KB=KEYBOARD
• Remove duplicated functions from FUNCTION= menu (*NET, *TARE, *UNITS, *ACCUM, *Z, *z).

Rev 2.0.09 Updates - 8/6/2015:
• Enable Outputs 5-8 when USBA option card is installed.
• Fix USBA display bug in Setup Menu #3.
• Allow a WinVRS local to send other scales’ weights to remote (besides SCALE 1).
• Add ability to backup 2XX-SNAP calibration to 225 internal memory for later retrieval (e.g. when an option card is replaced).
• Fix bugs in Talley Roll.

Rev 2.0.08 Updates - 4/29/2015:
• Add Gross/Net to tally record.
• Bug fixes in continuous output streams.

Rev 2.0.07 Updates - 12/3/2014:
• Fixed ANALOG FAIL error when the GUARDIAN scale type is selected.
• Fixed problem where the conversion factor gets corrupted in FINE SPAN and HIRES modes.

Rev 2.0.06 Updates - 11/20/2014:
• Added missing fields to ID Storage transaction file.
• Fixed bug in PWC Preset menu for remote indicator.
• Added byte order selection for 2xx-AB and 2xx-EIP option cards.
• Fixed lockup/display issues with various diagnostic selections in the REVIEW/SETUP Menu.

Version 2.0.05 Updates – 10/8/2014:
• Slow down printing in PRINT SETUP to allow slower printers to catch up.
• Bug fixes in print setup.
• Added more efficient wait timer.
• Added selection of 2XX-IP option card for printer.
• Prevent beeper from calling scale functions while in setup.
• Removed code disabling interrupts where possible to prevent beeper from being garbled.
• SnapStream bugs fixed:
- Fine span menu displaying error
- Diagnostic menu lockups
- Diagnostic menu display not clearing unneeded info
- Diagnostic menu storing load cell data incorrectly
- 2XX-SNAP remote indicator no long requires a power-cycle to start receiving weight

Version 2.0.04 Updates – 8/21/2014:
• Fixed problem with re-printing ticket.
• Verify zeroing from remote indicator and retry (Local/Remote Operation).
• Get weight and reference from ID record for 2nd and 3rd IDs on USBA card (mode= ID Storage or Package Weigher).

Version 2.0.03 Updates – 6/9/2014:
• Modified directory path for file storage on USB flash drive.
• Fixed display problem when viewing calibration/configuration counters.
• iCan limited to 50 sample\sec was 10s.
• Clear totalizer over capacity status when all scales under capacity.
• Allow USA=NO and not force calibration.

Version 2.0.02 Updates – 2/28/2014:
• Fixed problem with zeroing and changing units in local/remote operation.

Version 2.0.01 Updates – 1/29/2014:
• Added support for 2xx-USBA option card.
• Added Scale ID setup parameter.

Version 2.0.0
• Initial release for re-designed mainboard.

225-USA-ICAN.hex:

1. Supports ICAN
2. Supports analog and serial scales
3. Badge reader for ID Storage
4. MODE OF OPERATIONS:
a. Normal
b. ID Storage
c. Digital Fill Control
d. Preset Weight Comparator
e. Check Weigher
f. Batcher
g. Package Weigher
5. Serial output formats:
a. SMA
b. SB400
c. TOLEDO (short and long)
d. IQ355
e. NUMERIC WEIGHT
f. SB500
g. SB250/500M

AVR USB Update 225 Main Software Instructions

(AVR-ISP with USB Cable)
For instructions on how to flash the 225 main PC board software, please select Manuals, and then download this PDF:

AVRUSB Update 225 Main Software

To download files: Click on the download link above.

Rev 2.0.17 Updates – 9/30/2016:
• PWC mode of operation now has ability to use PWC1 as a zero monitor.
• Fixed display bug which occurred when ID prompts exceeded 9 characters.
• Added badge reader back to 225-USA build.
• All ICAN BUILDS – fixed bug that allowed weight to be transmitted in certain “no weight” error conditions.
• 225-SNAP – Added radio diagnostics that measures signal strength to each radio (requires 2XX-SNAP rev 1.5.7).

Rev 2.0.16 Updates – 5/25/2016:
• Add below zero status “U” to SMA string.
• Fix issues with FINE SPAN and HI RES when adjusting in high weight range (only applies to scales with 3-pt calibration).
• Bug fixes for SST compensation regarding dpp, stability, and saving upon exit of SETUP.

Rev 2.0.15 Updates – 4/15/2016:
• Fixed bug in the storing of serial ports’ “Gross Only” parameter.

Rev 2.0.14 Updates – 2/16/2016:
• Sped up read/write operations on the USBA option card.
• Fixed problem when auto assigning an ID, was not checking for ID on flash drive or SDcard on USBA option card.

Rev 2.0.13 Updates – 1/22/2016:
• Fixed the toledo long (8530) continuous output data stream check summing error.
• The Gross weight was not being written to the flash drive record with more than 1 scale and they were not totalized.

Rev 2.0.12 Updates - 1/4/2016:
• Allowed Gross only for continuous output.

Rev 2.0.11 Updates - 10/26/2015:
• Fixed problem with site ID for AWID badge reader.
• Added sleep mode for weight display when an SB500 scoreboard is attached. The key sequence is SHIFT-ESC S to turn on/off sleep mode.

Rev 2.0.10 Updates - 8/25/2015:
• Add Status for device installed in 2XX-USBA option card.
- SD=SD CARD
- FD=FLASH DRIVE
- KB=KEYBOARD
• Remove duplicated functions from FUNCTION= menu (*NET, *TARE, *UNITS, *ACCUM, *Z, *z).

Rev 2.0.09 Updates - 8/6/2015:
• Enable Outputs 5-8 when USBA option card is installed.
• Fix USBA display bug in Setup Menu #3.
• Allow a WinVRS local to send other scales’ weights to remote (besides SCALE 1).
• Add ability to backup 2XX-SNAP calibration to 225 internal memory for later retrieval (e.g. when an option card is replaced).
• Fix bugs in Talley Roll.

Rev 2.0.08 Updates - 4/29/2015:
• Add Gross/Net to tally record.
• Bug fixes in continuous output streams.

Rev 2.0.07 Updates - 12/3/2014:
• Fixed ANALOG FAIL error when the GUARDIAN scale type is selected.
• Fixed problem where the conversion factor gets corrupted in FINE SPAN and HIRES modes.

Rev 2.0.06 Updates - 11/20/2014:
• Added missing fields to ID Storage transaction file.
• Fixed bug in PWC Preset menu for remote indicator.
• Added byte order selection for 2xx-AB and 2xx-EIP option cards.
• Fixed lockup/display issues with various diagnostic selections in the REVIEW/SETUP Menu.

Version 2.0.05 Updates – 10/8/2014:
• Slow down printing in PRINT SETUP to allow slower printers to catch up.
• Bug fixes in print setup.
• Added more efficient wait timer.
• Added selection of 2XX-IP option card for printer.
• Prevent beeper from calling scale functions while in setup.
• Removed code disabling interrupts where possible to prevent beeper from being garbled.
• SnapStream bugs fixed:
- Fine span menu displaying error
- Diagnostic menu lockups
- Diagnostic menu display not clearing unneeded info
- Diagnostic menu storing load cell data incorrectly
- 2XX-SNAP remote indicator no long requires a power-cycle to start receiving weight

Version 2.0.04 Updates – 8/21/2014:
• Fixed problem with re-printing ticket.
• Verify zeroing from remote indicator and retry (Local/Remote Operation).
• Get weight and reference from ID record for 2nd and 3rd IDs on USBA card (mode= ID Storage or Package Weigher).

Version 2.0.03 Updates – 6/9/2014:
• Modified directory path for file storage on USB flash drive.
• Fixed display problem when viewing calibration/configuration counters.
• Clear totalizer over capacity status when all scales under capacity.
• Allow USA=NO and not force calibration.

Version 2.0.02 Updates – 2/28/2014:
• Fixed problem with zeroing and changing units in local/remote operation.

Version 2.0.01 Updates – 1/29/2014:
• Added support for 2xx-USBA option card.
• Added Scale ID setup parameter.

Version 2.0.0
• Initial release for re-designed mainboard.

225-USA-SCD.hex:

1. Supports SCD scales
2. Supports analog and serial scales
3. MODE OF OPERATIONS:
a. Normal
b. ID Storage
c. Digital Fill Control
d. Preset Weight Comparator
e. Batcher
f. Package Weigher
4. Serial output formats:
a. SMA
b. SB400
c. TOLEDO (short and long)
d. IQ355
e. NUMERIC WEIGHT
f. SB500
g. SB250/500M

AVR USB Update 225 Main Software Instructions

(AVR-ISP with USB Cable)

For instructions on how to flash the 225 main PC board software, please select Manuals, and then download this PDF:

AVRUSB Update 225 Main Software

To download files: Click on the download link above.

This software is required in order to use the 2XX-SNAP option card. It will support the use of SnapStream scoreboards and SNAP-COMs. It will also support SnapStream-enabled scales along with the ability to make load cell adjustments and display diagnostic information.

Rev 2.0.17 Updates – 9/30/2016:
• PWC mode of operation now has ability to use PWC1 as a zero monitor.
• Fixed display bug which occurred when ID prompts exceeded 9 characters.
• Added badge reader back to 225-USA build.
• All ICAN BUILDS – fixed bug that allowed weight to be transmitted in certain “no weight” error conditions.
• 225-SNAP – Added radio diagnostics that measures signal strength to each radio (requires 2XX-SNAP rev 1.5.7).

Rev 2.0.16 Updates – 5/25/2016:
• Add below zero status “U” to SMA string.
• Fix issues with FINE SPAN and HI RES when adjusting in high weight range (only applies to scales with 3-pt calibration).
• Bug fixes for SST compensation regarding dpp, stability, and saving upon exit of SETUP.

Rev 2.0.15 Updates – 4/15/2016:
• Fixed bug in the storing of serial ports’ “Gross Only” parameter.
• When SMART CAL fails, indicator will give option to keep trying rather than automatically abort.
• When a cal fails, it will not destroy the checksum of the indicator’s memory (it will still say “CAL REQ’D”). This means non-metrologically significant parameters will not be lost (for example PRINT TABS will not be lost).

Rev 2.0.14 Updates – 2/16/2016:
• Sped up read/write operations on the USBA option card.
• Fixed problem when auto assigning an ID, was not checking for ID on flash drive or SDcard on USBA option card.

Rev 2.0.13 Updates – 1/22/2016:
• Fixed the toledo long (8530) continuous output data stream check summing error.
• The Gross weight was not being written to the flash drive record with more than 1 scale and they were not totalized.

Rev 2.0.12 Updates - 1/4/2016:
• Added settle timer between each ingredient in the BATCHER mode of operation.

Rev 2.0.11 Updates - 10/26/2015:
• Fixed problem with site ID for AWID badge reader.
• Fixed rounding error when weight is within 1 graduation of zero.
• Added sleep mode for weight display when an SB500 scoreboard is attached. The key sequence is SHIFT-ESC S to turn on/off sleep mode.

Rev 2.0.10 Updates - 8/25/2015:
• Add Status for device installed in 2XX-USBA option card.
- SD=SD CARD
- FD=FLASH DRIVE
- KB=KEYBOARD
• Remove duplicated functions from FUNCTION= menu (*NET, *TARE, *UNITS, *ACCUM, *Z, *z).
• Improved reliability of Upload/Download of Calibration between 225 and 2XX-SNAP.
• Fix bug in Cell Output Calibration with multiple scales.

Rev 2.0.09 Updates - 8/6/2015:
• Enable Outputs 5-8 when USBA option card is installed.
• Fix USBA display bug in Setup Menu #3.
• Allow a WinVRS local to send other scales’ weights to remote (besides SCALE 1).
• Add ability to backup 2XX-SNAP calibration to 225 internal memory for later retrieval (e.g. when an option card is replaced).
• Fix bugs in Talley Roll.

Rev 2.0.08 Updates:
• Add Gross/Net to tally record.
• Bug fixes in continuous output streams.
• SNAP LR weight requests made quicker.
• SNAP diagnostic display bugs fixed.
• SNAP daisy-chained remote indicator support added.
• Allow radio pairing without resending scale data.
• Fixed parsing of SNAP-4 system status on version request.

Rev 2.0.07 Updates:
• Fixed ANALOG FAIL error when the GUARDIAN scale type is selected.
• Fixed problem where the conversion factor gets corrupted in FINE SPAN and HIRES modes.

Rev 2.0.06 Updates
• Added missing fields to ID Storage transaction file.
• Fixed bug in PWC Preset menu for remote indicator.
• Added byte order selection for 2xx-AB and 2xx-EIP option cards.
• Fixed lockup/display issues with various diagnostic selections in the REVIEW/SETUP Menu.

Rev 2.0.05 Updates
• Slow down printing in PRINT SETUP to allow slower printers to catch up (hardwired printers only, not SNAP-COMs).
• Changes to PRINT SETUP:
- Added ability to read calibration data for SnapStream scales.
- Added scale type SNAP4 to printout.
- Minor typo corrections.
• Removed code disabling interrupts where possible to prevent beeper from being interrupted.
• SnapStream bugs fixed:
- Fine span menu displaying error.
- Diagnostic menu lockups.
- Diagnostic menu display not clearing unneeded info.
- Diagnostic menu storing load cell data incorrectly.
- 2XX-SNAP remote indicator no longer requires a power-cycle to start receiving weight.

Rev 2.0.04 Updates
• Fixed problem with re-printing a ticket.
• Verify zeroing and retry up to three additional times if failed for Local/Remote configuration.
• Enabled zero limit for Canadian usage.
• Fixed bug that locked indicator when exiting setup with scale turned off.

Rev 2.0.03 Updates
• Fixed problem with re-printing ticket.
• Verify zeroing from remote indicator and retry (Local/Remote Operation).

Rev 2.0.02 Updates
• Fixed display problem when viewing calibration/configuration counters.
• Clear totalizer over capacity status when all scales under capacity.
• Allow USA=NO and not force calibration.

Rev 2.0.01 Updates
• Bug fixed: Indicator was locking on zero on power-up with filtering enabled and the scale empty until the zero key was pressed.

Rev 2.0.00 Updates
• Initial SMT software release.

Rev 1.1.9 Updates
• SnapStream printing reliability improved (requires 2XX-SNAP Rev. 1.3.8).

Rev 1.1.8 Updates
• SnapStream snap filtering now handled by indicator (requires 2XX-SNAP Rev. 1.3.7).

Rev 1.1.7 Updates
• This version fixes bugs related to SMA commands through a SNAP-COM.

AVR USB Update 225 Main Software Instructions

(AVR-ISP with USB Cable)

For instructions on how to flash the 225 main PC board software, please select Manuals, and then download this PDF:

AVRUSB Update 225 Main Software

To download files: Click on the link above.

Version 1.1.00 – 6/6/2014

To download files: Click on the download link above.

Effective 11/02/2007

• This software changes fixes the problem of not completely charging the batteries.

To download files: Click on the link above.

825 Checkweigh features:
• One to five configuable weight zones
• Configurable foreground and background colors for each zone
• Configurable labels for each zone

To download files: Click on the link above.

825 Digital Fill Control Features:
• Two modes of operation, Fill Control and Batching
• One or Two speed filling
• Automatic trim adjustment
• Multi-drop capability
• Decumulative batching capability
• Configurable zero tolerance
• Can store hundreds of formulas with multiple ingredients
• Reporting by formula or ingredient

To download files: Click on the link above.

825 Highway Weighstation Features:
• Weighstation application for use with up to 4 scale platforms and total
• 3 modes of operation: Semi-automatic, Automatic, and Axle mode
• Configurable ticket tab stops
• Traffic light digital outputs
• Works with SB500 traffic light control, or multiple scoreboards daisy chained together
• Multiple peripheral devices, including: Printer, Scoreboard, Audit Printer, PC
• Selectable weight presets with color indications of violations

To download files: Click on the link above.

825 ID Storage Features:
• Weigh in / weigh out functionality with one or two pass operation
• Local/Remote operation
• Can store hundreds and hundreds of permanent and temporary ID’s
• Up to 4 ID’s can be associated with a single transaction
• Can view, reprint, or void transactions stored in memory
• Transaction data can be exported to .CSV format

To download files: Click on the link above.

825 Multi-scale Features:
• Up to 10 scales displayed simultaneously
• Totalizer function for some or all attached scales
• Configurable checkweighing for individual scales
• Ethernet/IP or Modbus output of scale data for communicating to a PLC

To download files: Click on the link above.

825 Standard Indicator Software Hex File

To download files: Click on the link above.

(2 KB zip file)

The APS-USB-Driver.zip contains the USB driver INF file and the ReadMe file on how to load it, both of which are also loaded on the CD which ships with the Enterprise APS series scales.

The DLX50 DL Series Scale PC Utility is a flexible and easy-to-use PC based program with drag-and-drop graphics that allows users full control over PLUs. PLUs can easily be created, viewed, and modified by the utility. PLUs created at the scale to be viewed and modified as well. PLUs can quickly be assigned to a quick key using the utility and then the setup page printed for a key overlay to use on the scale. The utility has a user-friendly graphic interface with over 50 label types available to set up with fully customizable layouts and font sizes and allows custom bitmap graphics to be loaded onto the scale for use in label printing. The customized reporting features provide you with all the information you require to make your accurate business decisions for your operation.

To download files: Click on the download link above.

(143 MB zip file)

DLX50 DL Series Scale PC Utility Install Instructions:

1. Download the DLX50 PC Utility and save the file to your Desktop.

2. Right click on the file “DLX50-DL-Series-Scale-PC-Utility.zip”.

3. From the menu options, select “Extract All…”.

4. Make sure “Show extracted files when complete” is not selected (no check mark).

5. Click on the Extract button.

6. Double click on the “DLX50-DL-Series-Scale-PC-Utility” folder on the desktop.

7. Double-click the “setup.msi” Windows Installer and follow the installation prompts.

8. Double click on the DLX50 Software Utility Program icon on the Desktop to run the program.

9. Instructions for the utility are available by downloading the 8529-0638-0M, DLX PC Utility Setup and Procedures manual.

Select Manuals, and then download this PDF:

DLX50 PC Utility Manual

EMR/EHR CONNECTIVITY

Detecto’s MedVue indicator supports several formats and techniques for transmitting data. Data transmission may be initiated via computer command or operator input and transmitted via the RS-232 serial, USB, or optional wired or Wi-Fi Ethernet ports.

The following data/information will be sent via the selected port:

Time, Date, ID, BMI, Height, Weight

Time= hh:mm
Date= mm/dd/yy
ID= xxxxxxxxxxx (patient ID)
BMI= xx.x (percentage)
Height= x’ xx.x” or xx.x cm (inches or centimeters)
Weight= xxx.xuu G (gross weight)

ASCII Output String:
hh:mm,mm/dd/yy,xxxxxxxxxxx,xx.x,x’ xx.x”,xxx.xuu G

iSite Remote Monitoring works in conjunction with Cardinal Scale’s SCBD and DC SmartCell digital load cells that are connected to the Internet. iSite is a Cloud-based remote monitoring system that can send dealers e-mail and/or text alerts for digital load cell issues. The software is free for authorized Cardinal dealers. You may access the iSite Web site via this link:

isite.cardinalscale.com

iSite utilizes the default web port 80 to issue a POST command to push data to an Amazon Web Services database server using the HTTP protocol. This data is posted to the server utilizing the popular JSON format. Additionally, it uses the same port to issue a GET command to receive the mode (Standard or Diagnostic) and frequency in which the indicator posts data. Cardinal Scale indicators do not utilize any other ports or protocols that would compromise network devices and/or security.

To download files: Click on the link above.

Revision 1.01.08 - Effective May 8, 2014

Rev 1.01.08 - Fixed issue with Height/BMI locking with weight when lock key pressed or auto-lock occurred.

Rev 1.01.07 - Update to fix production issue with MV2. Update for new MVWIFI option card hardware.

Rev 1.01.06 - Update MedVue application software to fix an issue with the Ethernet/WiFi option card. Adjust display contrast to help with the new white backlight. Improvements to help extend battery life.

Rev 1.01.05 - Update MedVue application software adding OIML Yes/No prompt to prepare for MV2 production.

Rev 1.01.04 - Update MedVue application software to fix a bug when communicating with Welch Allyn devices.

Rev 1.01.03 - Update MedVue application software to fix a bug when option card installed that would affect the display.

Rev 1.01.02 - Update MedVue application software to fix a bug in detecting the SDCard.

Rev 1.00.01 - Update MedVue application software to fix a bug in serial/TCP/USB communication.

Rev 1.00.00 - Initial software release.

Software Update Instructions:

In order to update the MedVue indicator you will need a USB-A to USB-B cable, a Phillips head screwdriver, and a paper clip.

Software Update Procedure:

• Download the current MedVue software.
• Unzip the downloaded file by right clicking and select “Extract All”.
• Using the Phillips head screwdriver, remove the left end cap of the indicator.
• Using the paper clip, press the calibration switch and power on the indicator.
• The indicator should now display “boot rev 1.0” at the bottom of the display.
• Connect the indicator to your PC using the USB-A to USB-B cable.
• You should see a new removable storage device appear in My Computer.
• Find the unzipped file from step 2 above, it should be named “MedVue.afx.S19”.
• Drag and drop the file to the new removable storage drive named “MedVue”.
• The indicator display should show “Flashing S19” while the update is progressing.
• Once done, the indicator should reset and the new revision number should appear during startup.
• If you have difficulty, try starting over from the beginning of these steps.

To download files: Click on the link above.

Effective 7/12/2013

This file is compatible with the following:

32 bit versions:
Windows 2000/XP/Vista/7

64 bit versions:
Windows Vista/7

The MedVue Wi-Fi Apple® App for iPads and iPhones is available through the Apple® store for download to your device via this link:

https://itunes.apple.com/us/app/medvue/id661865294?mt=8

To download files: Click on the download link above.

(15 MB zip file)

Please Note: nControl must be run as Administrator now. To do so automatically, every time you must complete the following steps (See screenshots below):

1.) Right-click on the nControl icon
2.) Select “Properties”
3.) Click the “Compatibility” tab
4.) Check the “Run this Program as an Administrator” box
5.) Click “Apply”
6.) Click “OK”

Version 3.8.2 Updates - 5/13/2015:
• Updated the serial driver for Windows 7 and 8.

Version 3.8.1 Updates - 7/8/2014:
• Fixed a bug where Windows serial communication was not working.
• Fixed an issue with configuration files not loading correctly.
• Added new fields to the print set-up.

Version 3.8 Updates - 5/12/2014:
• Fixed issue with additional ID fields not translating correctly to the 225 ticket.
• Fixed issue with scale 1-3 gross weights disappearing when creating a ticket.
• Fixed all fields now correctly correspond with 225 print codes.
• Changed temp.dvc is now saved in ProgramData\Cardinal Scale Mfg\nControl\Temporary for Win 7 and above.
• Added new 225 configuration files.
• Updated the installer.

Version 3.6 Updates - 12/30/2013:
• Fixes and expansion of current features.

Version 3.5 Updates - 11/01/2011:
• This new version provides support for 825 Spectrum ticket design and printing.

Version 3.3 Updates - 8/1/2011:
• Fixed issue with entering control characters in the hexadecimal format <0x1D>.
• Updated the installer.

Version 3.2 Updates - 10/5/2009:
• Added ticketing support for the 225 indicator. Selecting the 225 enables users to design and print tickets, as well as send and receive ID storage files.
• Added support for sending and receiving 225 indicator ID storage files. A user can now send and receive ID storage files for the 225 indicator.
• Removed obsolete features.
• Added documentation.
• Updated the Help files.
• Fixed a problem with the VpEdit.ocx control. The clock was lost on the ticket. (But still printed—-unmovable in nControl however).
• Fixed a problem resulting from Microsoft dependencies.
• Changed the installer to allow the user to select the file directory.

The NEST Android® App is available through the Google® Play App Store for download to your device via this link:

https://play.google.com/store/apps/details?id=com.cardet.mobile.cardinal225nest

To download files: Click on the download link above.

Rev 2.7.5 - Effective 2/25/2013

Rev 2.7.5 Updates
• Fixed a zero only calibration bug.
• Restores the annunciator dazzle while in set-up.

Rev 2.7.3 Updates
• Fixed hi-res display mode (weight was not updating).
• Added support for SnapStream scoreboards while displaying hi-res and fine span weights.
• Added SnapStream software versions to the display test routine.

Rev 2.6.8 Updates:
• Fixed the PWC outputs so that they will work along with the 2XX-OU option.

Rev 2.6.6 Updates:
• Fixes a problem that would not let you LOCK/UNLOCK a key, this problem was introduced in rev 2.6.4.

Rev 2.6.5 Updates:
• Fixed error when using the CAL switch to advance thru the setting pages (A-d,CAL,SST,Sio…..).

Rev 2.6.4 Updates:
• Added support for the 212G display (210 only).
• Added support for the GUARDIAN scale (SST).

Rev 2.6.3 Updates:
• Fixed a problem where preset values 2 and 3 could not be entered when there was continuous serial output and the type selection is 0.

Rev 2.6.2 Updates:
• Fixed a weight display problem on the SERIAL SCALE.
• When print key is pressed on the SERIAL SCALE, the traffic light on an SB500 on the LOCAL scale will turn green.

To download files: Click on the link above.

Rev 1.3 - Effective 11/11/2011

Rev 1.3 Updates:
• Increased the RS-232 timeout from a half second to 3 seconds correcting a display issue.

To download files: Click on the link above.

(4 KB zip file)

The Example-Code_APS.zip contains two files written in Objective-C for an iOS device. The files show how to modify the application’s “AppDelegate” in order to communicate with the scale. The example illustrates how to open a network connection to the scale’s APS-WIFI and then retrieve the weight and status and fill out some variables with the information. Basically, this sends the information into the application where the user can then do something with it. For a programmer working to integrate this scale with their system, it should tell them everything they need to know in order to get it to make weight.

To download file: Click on the link above.

Rev. 3.1 Updates – 8/31/2015:
• Added relay timer for when TL=1 or 2 (meaning a relay is used to control the traffic light).
• The relay timer requires Configurable Traffic Light version 1.1.

Rev. 3.0 Updates – 3/13/2015:
• Added string handling for 2XX-SNAP when being sent from a SNAP COM.

Rev. 2.9 Updates:
• Added red and green traffic lights to switched message mode of operation for the following message combinations:
- Open/Close
- Go/Stop
- Start/Stop
• Fixed bug that caused operation to fail upon power cycle in switched message mode.

Rev. 2.8 Updates:
• SNAP rev number will flash on startup if a SNAP option card is installed

Rev. 2.7 Updates:
• Screen will read “———“ upon startup instead of “sb500”
• Bug fixes

The ScaleNET Android® Configuration App is available through the Google® Play App Store for download to your device via this link:

https://play.google.com/store/apps/details?id=com.cardet.scalenetconfig

The ScaleNET Apple® Configuration App for iPads and iPhones is available through the iTunes® App Store for download to your device via this link:

https://itunes.apple.com/us/app/scalenet/id661826676?mt=8&ls=1

To download files: Click on the link above.

Rev. 1.00.01 - Effective 5/31/2013

To download files: Click on the download link above.

Rev 3.1.07 - Effective 9/30/2016

Rev 3.1.07 Updates
• Added radio diagnostics that measures signal strength to each radio (requires 2XX-SNAP rev 1.5.7).
• Ensure that additional talley commands are not processed while one talley command is pending due to motion.
• Fix bug that caused “Pass 1” or “Pass 2” to not display in certain conditionS when mode = ID STORAGE and LFT = YES.

Rev 3.1.06 Updates
• Fixed issues with net weighing on full-length scale in axle mode.
• Fixed alphabetic input from keyboard via USBA option card.
• Enable remote key functions on 210F.
• Fix lockup bug when mode = DFC, ID = YES, and user presses backspace with no text in ID entry screen.

Rev 3.1.05 Updates
• Fixed bug introduced in rev 3.1.04 that caused 12-hr time mode to not display am/pm.

Rev 3.1.04 Updates
• Fixed chechsum problem with the toledo long (8530) continuous output.
• Fix displaying of large negative weight after axle printed in axle weigher mode.
• USAB: Sped up read/write functions for the flash drive and SDcard.
• Show “FULL” when permanent ID memory is full.

Rev 3.1.03 Updates
• Allow OPER menu to be enter in serial scale mode.
• Fixed bug that sometimes prompts for ID twice in AXLE OPER menu.
• Added ability to delete visual tickets.
• Allow access to function keys even if scale is uncalibrated, this allows two important things to be viewed regardless of calibration:
o A lamptest (which includes software version numbers)
o SNAP cell mV readings

Rev 3.1.02 Updates
• Fixed bug that caused USBA option card to store duplicate transactions when using nControl ticket.
• Key input now displays an underscore instead of a blank screen when empty.
• Added support for setting PWC 5-8 weight values with PLC-related option cards.
• Livestock mode prompts for ID in setup.
• Axle weigher displays “PrntEd” in auto mode when printing.
• SNAP zero tolerance is handled by indicator.
• Allow 2XX-SNAP option card calibration to be duplicated and restored from mainboard.
• Change to not require deletion of calibration when SNAP C numbers are viewed but not changed.

Rev 3.1.01 Updates
• Set-up bugs fixed for SNAP-COM.
• Added nControl functionality through SNAP-COMs.
• Added the ability to receive and respond to SMA commands through multiple serial ports simultaneously (SNAP-COMs included).
• Disabled ASCII loopback to a remote indicator via SnapStream.
• SnapStream daisy-chained remote indicator support added.
• Fixed default printer port bug.

Rev 3.0.20 Updates
• Fixed prompting sequence in SST menu.
• Make Guardian hydraulic scale adjustments compatible with Dpp>0.
• Preliminary filter default to 0 when dflt=1 or 2.

Rev 3.0.19 Updates
• Fixed bug in USB transaction file when decimal point in used.
• Fixed problem with including data from previous transaction record in the current transaction record.
• Ensures that all outputs are OFF when entering SETUP.

Rev 3.0.18 Updates
• Add preliminary filter that does not break (filter setting “P=” is the number of samples to be integrated).

Rev 3.0.17 Updates
• Fixed problem with certain DFC ID’s being cleared before every edit.
• Modified routine for saving ID’s to be compatible with storage via USB-A option card.

Rev 3.0.16 Updates
• Increment the CCN when printing an nControl ticket in IDS mode of operation.
• Allow using remote inputs #5 and #2 to simulate an * PRINT keypad operation for the Axle Weigher and Livestock modes of operation.

Rev 3.0.15 Updates
• Update accumulators for DFC (speed=2, IDS=yes).
• Remove ‘ID:’ text when printing ID in nControl ticket.
• Confirm serial zeroing and retry up to four times if failed for Local/Remote configuration.
• Limit highfreqvalue to 99 (because MAX_SAMPLE_QUEUE is 100).

Rev 3.0.14 Updates
• Modified ETR record so that displayed weight (Gross or Net) is stored with mode indicator (USA=NO).

Rev 3.0.13 Updates
• SnapStream millivolt diagnostics bug fixed.

Rev 3.0.12 Updates
• Rev 3.0.11 caused a problem with auto ID in mode=IDS. Fixed the problem.
• Modified directory for data storage on USB drive for PC Companion.

Rev 3.0.11 Updates
• Fixed prompting sequence for dump gate and dump gate timer (mode=DFC).
• Added error message ‘iPFULL’ if the in process file is full (mode=IDS) maximum number of In-Process IDs is 25.
• SnapStream timeout routine modified and increased.

Rev 3.0.10 Updates
• Allows printing of ID for all modes of operation for an nControl ticket.

Rev 3.0.9 Updates
• SnapStream bug fix - the interval was getting set to 0.

Rev 3.0.8 Updates
• Added support for 2xx-USBA option card.
• Fixed problem displaying a blank ID in mode of operation 0.
• Added Scale ID in setup.
• Fixed problem with printing ID in nControl ticket for mode of operation 0.
• Fixed problem with prompting on 2xx-IP/RS232 option cards.

Rev 3.0.7 Updates
• SnapStream printing reliability improved (requires 2XX-SNAP Rev. 1.3.8).

Rev 3.0.6 Updates
• Manual mode axle-weigher bugs fixed.
• Livestock weigher interval rounding corrected.
• SnapStream filtering now handled by indicator (requires 2XX-SNAP Rev. 1.3.7).

Rev 3.0.5 Updates
• Added support for 2XX-ETR option card.

Rev 3.0.4 Updates
• Key lockout fixed.
• ASCII serial commands have been modified to suit new hardware and software.

Rev 3.0.3 Updates
• SMA commands related to continuous output updated for new com port configuration.
• Modified time-chip write/read test to correct “nochip” error.
• Added auto-axle weigher for both axle pads and truck scales.
• Software allows the 205 and 210 indicators to be compatible with Cardinal’s SnapStream wireless products.

Please Note: The SMT version of the 205/210 indicator no longer requires a unique hex file for use with Snapstream. All SnapStream functionality is included in the standard software starting at rev 3.0.0.

To download files: Click on the link above.

To download files: Click on the download link above.

Rev. 2.7.5 - Effective 11/21/2013

Rev 2.7.5 Updates
• MV/V diagnostic fixed and scale timeout functionality restored.

Rev 2.7.4 Updates
• SnapStream printing reliability improved (requires 2XX-SNAP rev 1.3.8) .
• SnapStream filtering now handled by indicator (requires 2XX-SNAP rev 1.3.7).

To download files: Click on the link above.

Versions 2.6 - Updated on March 5, 2013:

• Added the ability to daisy chain scoreboards using a single scale weight in any string format.

To download files: Click on the download link above.

(16 MB zip file)

Version 2.3 08-30-2018

Version 2.19 05-29-2007 - Added dialog for spreadsheet customization, removed dependency on Access database for configuration settings, and separated configuration files, indicator profiles and device profiles into separate file for ease of replacement.

Version 2.16 01-17-2006 - Modified to not use LSRMST_INSERT which may cause problems with some USB-Serial converters.

Version 2.15 01-16-2006 - Added 758C device profile. This will capture time/date, ID, BMI, Height, Weight – Gross, Tare, and Net.

Version 2.15 11-17-2005 - Modified to allow up to 20 items for print capture.

Version 2.14 09-08-2005 - Added feature for WinDDE to be a TCP/IP server to allow socket connections to receive weight in SMA on demand format. Use “General Setup” to set the TCP/IP port to be used as the server. Make sure the port is opened in the firewall. Other computers on the network can then connect to the WinDDE computer. For example, use Hyperterm for a Winsock connection, Type “W” and ENTER to receive the weight in SMA format. Type “A” and ENTER for the first line of the about information. Type “B” and ENTER for each additional line of about information.

To download files: Click on the download link above.

(70 MB zip file)

This is a complete unregistered program download. The demo program allows the customer prospect to run 15 weight transactions. They will then be required to post and clear to continue on with an additional 15 transactions. The password and operator ID numbers are 4 and 4.

Version 1.08.5 Build 354 – Updated 8/25/2017
• Fixed issue where error message would pop up when viewing in process vehicles while all database tables were on.
• Fixed issue where an “Invalid Argument” error message would occur when using multiple IP devices and at least 1 device could not connect.
• Added ETR (Electronic Tally Record) support for client workstations.
• Updated device profiles to reflect modern indicators.
• Fixed issue when pressing the “ESC” soft key during prompting on a 225 indicator would not restart the prompting sequence.
• Removed “Multi” tab from device profile setup since multi platform is custom only.

To download files: Click on the download link above.

(55 MB zip file)

The demo download below is a complete unregistered program download. The demo program allows the customer prospect to run 15 weight transactions. They will then be required to post and clear to continue on with an additional 15 transactions. The password and operator ID numbers are 4 and 4.