To download files: Click on the download link above.
Rev 2.0.18 Updates – 1/20/2017:
• Fixed a loss of deadload during certain scenarios involving power outages.
• Added more descriptive boot-up error messages when there is a CAN bus error.
Rev 2.0.17 Updates – 9/30/2016:
• PWC mode of operation now has ability to use PWC1 as a zero monitor.
• Fixed display bug which occurred when ID prompts exceeded 9 characters.
• Added badge reader back to 225-USA build.
• All ICAN BUILDS – fixed bug that allowed weight to be transmitted in certain “no weight” error conditions.
• 225-SNAP – Added radio diagnostics that measures signal strength to each radio (requires 2XX-SNAP rev 1.5.7).
Rev 2.0.16 Updates – 5/25/2016:
• Add below zero status “U” to SMA string.
• Fix issues with FINE SPAN and HI RES when adjusting in high weight range (only applies to scales with 3-pt calibration).
• Bug fixes for SST compensation regarding dpp, stability, and saving upon exit of SETUP.
• Add SST-style adjustment to ICAN for hydraulic-ICAN installations.
Rev 2.0.15 Updates – 4/15/2016:
• Fixed bug in the storing of serial ports’ “Gross Only” parameter.
Rev 2.0.14 Updates – 2/16/2016:
• Sped up read/write operations on the USBA option card.
• Fixed problem when auto assigning an ID, was not checking for ID on flash drive or SDcard on USBA option card.
Rev 2.0.13 Updates – 1/22/2016:
• Fixed the toledo long (8530) continuous output data stream check summing error.
• The Gross weight was not being written to the flash drive record with more than 1 scale and they were not totalized.
Rev 2.0.12 Updates - 1/4/2016:
• Revision update only.
Rev 2.0.11 Updates - 10/26/2015:
• Fixed problem with site ID for AWID badge reader.
• Added sleep mode for weight display when an SB500 scoreboard is attached. The key sequence is SHIFT-ESC S to turn on/off sleep mode.
Rev 2.0.10 Updates - 8/25/2015:
• Add Status for device installed in 2XX-USBA option card.
- SD=SD CARD
- FD=FLASH DRIVE
- KB=KEYBOARD
• Remove duplicated functions from FUNCTION= menu (*NET, *TARE, *UNITS, *ACCUM, *Z, *z).
Rev 2.0.09 Updates - 8/6/2015:
• Enable Outputs 5-8 when USBA option card is installed.
• Fix USBA display bug in Setup Menu #3.
• Allow a WinVRS local to send other scales’ weights to remote (besides SCALE 1).
• Add ability to backup 2XX-SNAP calibration to 225 internal memory for later retrieval (e.g. when an option card is replaced).
• Fix bugs in Talley Roll.
Rev 2.0.08 Updates - 4/29/2015:
• Add Gross/Net to tally record.
• Bug fixes in continuous output streams.
Rev 2.0.07 Updates - 12/3/2014:
• Fixed ANALOG FAIL error when the GUARDIAN scale type is selected.
• Fixed problem where the conversion factor gets corrupted in FINE SPAN and HIRES modes.
Rev 2.0.06 Updates - 11/20/2014:
• Added missing fields to ID Storage transaction file.
• Fixed bug in PWC Preset menu for remote indicator.
• Added byte order selection for 2xx-AB and 2xx-EIP option cards.
• Fixed lockup/display issues with various diagnostic selections in the REVIEW/SETUP Menu.
Version 2.0.05 Updates – 10/8/2014:
• Slow down printing in PRINT SETUP to allow slower printers to catch up.
• Bug fixes in print setup.
• Added more efficient wait timer.
• Added selection of 2XX-IP option card for printer.
• Prevent beeper from calling scale functions while in setup.
• Removed code disabling interrupts where possible to prevent beeper from being garbled.
• SnapStream bugs fixed:
- Fine span menu displaying error
- Diagnostic menu lockups
- Diagnostic menu display not clearing unneeded info
- Diagnostic menu storing load cell data incorrectly
- 2XX-SNAP remote indicator no long requires a power-cycle to start receiving weight
Version 2.0.04 Updates – 8/21/2014:
• Fixed problem with re-printing ticket.
• Verify zeroing from remote indicator and retry (Local/Remote Operation).
• Get weight and reference from ID record for 2nd and 3rd IDs on USBA card (mode= ID Storage or Package Weigher).
Version 2.0.03 Updates – 6/9/2014:
• Modified directory path for file storage on USB flash drive.
• Fixed display problem when viewing calibration/configuration counters.
• iCan limited to 50 sample\sec was 10s.
• Clear totalizer over capacity status when all scales under capacity.
• Allow USA=NO and not force calibration.
Version 2.0.02 Updates – 2/28/2014:
• Fixed problem with zeroing and changing units in local/remote operation.
Version 2.0.01 Updates – 1/29/2014:
• Added support for 2xx-USBA option card.
• Added Scale ID setup parameter.
Version 2.0.0
• Initial release for re-designed mainboard.
225-USA-ICAN.hex:
1. Supports ICAN
2. Supports analog and serial scales
3. Badge reader for ID Storage
4. MODE OF OPERATIONS:
a. Normal
b. ID Storage
c. Digital Fill Control
d. Preset Weight Comparator
e. Check Weigher
f. Batcher
g. Package Weigher
5. Serial output formats:
a. SMA
b. SB400
c. TOLEDO (short and long)
d. IQ355
e. NUMERIC WEIGHT
f. SB500
g. SB250/500M
AVR USB Update 225 Main Software Instructions
(AVR-ISP with USB Cable)
For instructions on how to flash the 225 main PC board software, please select Manuals, and then download this PDF:
AVRUSB Update 225 Main Software
